In this article, we, for the first time in the literature, present a case of LMCA stenosis treated with renal stents after Cabrol operation.
Figure 2: Aortography showing Cabrol graft between aortic root graft and left main coronary artery.
Figure 3: (a, b) Left main coronary artery stenosis.
Figure 4: Coronary computed tomography angiography showing true left main coronary artery stenosis.
Through the left radial access, the LMCA was cannulated with a JR4 guiding catheter. The lesion was passed with a 0.018 guidewire (Platinium Plus™; Boston Scientific Corp., MA, USA) through the left anterior descending (LAD) artery for support and a 0.014 guidewire was placed to the left circumflex artery (LCx) as to keep in touch. The size of the LMCA was reported about 6 mm after CT-CA. Due to the lack of coronary stent of an appropriate size, it was decided to implant two overlapped renal vascular stents (6×14 mm, RX Herculink Elite® Renal Stent System; Abbott Vascular Inc., CA, USA) (Figure 5).
Figure 5: Post-percutaneous coronary intervention image of left main coronary artery.
The patient was discharged by acetylsalicylic acid (ASA), clopidogrel, and warfarin (triple therapy) therapy. At the first month control visit, the patient was free from anginal symptoms, and ASA was stopped. Six months later, the patient was admitted again with anginal symptoms and CA was performed which revealed 70% stenosis of LMCA. Despite early stent restenosis, it was decided to perform balloon angioplasty with prolonged triple therapy due to the high risk of reoperation. A balloon angioplasty was performed using a 6×20-mm peripheral balloon (Abbott; Armada 35) for LMCA stents. There was no residual stenosis. The patient was discharged with triple therapy for prolonged time.
At the first-year control visit on triple therapy, the patient was free of anginal symptoms. After 18 months, the patient was admitted with atypical chest pain, and control CA revealed 10 to 20% in-stent stenosis in the LMCA and it was decided to continue medical treatment (Figure 6).
Figure 7: Illustration of classical Cabrol procedure and modified Cabrol procedure in our patient.
Button modification of Bentall is the gold standard technique for coronary anastomosis to the aortic root graft. Cabrol is the method of choice in selected cases as reoperations, heavily calcified aorta, large dissections or aneurysms, and coronary ostium with low origins (<1.5 cm). The Cabrol procedure is also a bailout procedure, when unexpected complications occur and is not recommended as a routine first-line method for coronary anastomosis to aortic graft; however, it is a valuable method in selected and complicated cases.[3,4]
The LMCA stenosis or occlusion can be treated by percutaneous coronary intervention or reoperation.[5,6] In our case, the patient was admitted with unstable angina six years after the operation. The CT-CA was performed to identify whether it was a pseudostenosis caused by tension or a true stenosis. The CT revealed that it was a true stenosis with fibrofatty characteristic.
Aortography is a method of choice to visualize the Cabrol graft ostium, as in our case. The Cabrol graft is usually anastomosed to the anterior wall of aortic root graft close to the coronary ostium which is attached to the Cabrol graft.
Undersized stenting of large coronary arteries carries the risk of stent restenosis and stent thrombosis. In general, large coronary angioplasty balloons and stents are not available and percutaneous intervention to large coronaries are still challenging. In our case, a cardiac radiologist reported that a 6×25-mm stent would be appropriate to the LMCA. Therefore, two overlapping 6×14-mm renal stents (RX Herculink Elite® R enal S tent S ystem; A bbott V ascular I nc., CA, USA) were implanted. Although there are coronary artery stenosis cases treated with renal stents in the literature, there is a limited number of data regarding the long-term outcomes and optimal treatment strategy.[7] Due to stent restenosis after six months after stent implantation, percutaneous balloon angioplasty was done and prolonged treatment with triple therapy was initiated in our patient.
In conclusion, the Cabrol procedure is not as frequent as the Bentall procedure; however, it is a very useful technique in selected patients. The Cabrol graft is usually anastomosed anteriorly to the aortic root graft close to the related coronary ostium. Cannulating the graft is similar to saphenous grafts, and an aortography may be helpful for the appropriate catheter selection. Being familiar with the anatomy of this procedure can be life-saving, particularly in acute conditions. Nonetheless, since renal stenting to coronary arteries is challenging and long-term results are scarce, further largescale, long-term studies are needed to draw a firm conclusion.
Declaration of conflicting interests
The authors declared no conflicts of interest with respect
to the authorship and/or publication of this article.
Funding
The authors received no financial support for the research
and/or authorship of this article.
1) Bentall H, De Bono A. A technique for complete replacement
of the ascending aorta. Thorax 1968;23:338-9.
2) Cabrol C, Pavie A, Gandjbakhch I, Villemot JP, Guiraudon
G, Laughlin L, et al. Complete replacement of the ascending
aorta with reimplantation of the coronary arteries: new
surgical approach. J Thorac Cardiovasc Surg 1981;81:309-15.
3) Kourliouros A, Soni M, Rasoli S, Grapsa J, Nihoyannopoulos
P, O"Regan D, et al. Evolution and current applications of the
Cabrol procedure and its modifications. Ann Thorac Surg
2011;91:1636-41.
4) Teskin Ö, Yapici F, Enç Y, Özay B, Ketenci B, Demirtaş
M, et al. Early and late results of bentall procedure and its
modifications. Turk Gogus Kalp Dama 2000;8:579-83.
5) Moussa M, Bhindi R, Ravandi A. Successful percutaneous
coronary intervention of a thrombosed Cabrol graft after
intraoperative cardiac arrest. Curr Res Cardiol 2014;1:111-3.